ubitech, electrical countractors, panels, electrical panels,substation
     
 

 

 

 

 

 

 

 

 

 

 

 



THINK SAFETY FIRST!

  Home: PBIPL : Products: Distribution Boards  
 


Distribution Boards normally comprise of either ACB/MCCB as the incomer and the MCCB/SFU/MCB as the outgoing feeders. The distribution Boards are free standing type or the wall mounting type.
Distribution boards can be offered in compartmentalized or non compartmentalized design with single or double door configuration. Distribution boards have the adequate space for the cable termination . Terminals are shrouded for the safety.

Salient Features- Distribution boards:-

  • Designed to meet the requirement of IS-8623 on Factory built assemblies.
  • Flexible construction allows the positioning of the bus bars at top or bottom.
  • Bus bars and vertical risers tested for 50KA for 1 sec.
  • DMC/SMC reinforced FRP material for bus bars supports.

Technical Data:-

Rated Insulation : 1000 Volts, 50 Hz.
Rated Operational Voltage : Power circuit-440 Volts AC, 3Phase 4 wire or 3 wire. Control circuit-110 Volts, 220 Volts, 415 Volts AC
or 220 Volts, 110 Volts DC
Rated Current : 4000 Amps.
Short Circuit Strength : 50KA rms for 1sec. and 105 KA peak fault with stand
Ambient Temperature : 40 c
Degree of protection : IP-54 as per IS 2147
Minimum bus bar clearance : Phase to Phase 25
Phase to Neutral 25mm.
 


OUR CORPORATE MOTTO

"We regard quality as our lifeline, customer’s demand as our motivity ,
keeping development and leading the market as our responsibility with
customer satisfaction as our ultimate goal."

 
 

 
 
Powered by Khushitech                                                                                                                                                                                             Check email online